Grass Valley Imagestore 750 v.2.0.1 - Manual (Page 142)

Front Panel Operations Imagestore 750 User Manual
Page 142 Miranda Technologies Inc.
Conf From USB
Copies a new configuration file (config.xml) and GPI setup file (gpi.xml)
from the inserted USB media. If a configuration file is successfully copied
from USB, then a restart is advised.
Diags Save
Copies the diagnostic files to the inserted media.
•
messages Log file from current session
•
messages.old Log file from previous session
Load Licences
Copies new licence codes (syscodes.txt) from the inserted USB stick, which
enable software options on the Imagestore 750 after a restart.
Load Mixfile
Copies new custom mixfiles (all files ending in .mix) from the inserted USB
media to the hard disk. The new file(s) will reside in /home/mixes/.
Erase Mixfile
Index through the files within the /home/mixes/ library using the joystick
arrows ⊳ . Once selected press enter, then use the joystick arrows ⊳ to
select Yes to delete.
Standard mixfiles (which are stored inside /etc/mixes) can not be deleted via
this method.