Grass Valley Imagestore 750 v.2.0.1 - Manual (Page 334)

Standard Mixfiles Imagestore 750 User Manual
Page 334 Miranda Technologies Inc.
Note: It is not recommended to use VO preset level unless this is
desired globally for the VO. This is because each input bunch to
the voice-over is used to represent four input channels, whereas
each output bunch is used to represent two channels.
Test Mixfiles
The test mixfiles are useful during audio trouble-shooting and system
configuration. They should not be used when on-air.
test_eply.mix
This mixfile is designed to play the current Easyplay file out of the first eight
channels of embedded program outputs, preview outputs, clean feed outputs,
monitor outputs and AES channels.
testtone_all.mix
This mixfile is designed to emit a 1 kHz sine wave onto all possible output
channels (program, preview, clean feed, monitor and AES). There is no input
source for this mixfile.
Please note that the testtone will play out at 0 dBFS (+18 dBu) which is
considerably louder than normal program levels. To avoid damage to
loudspeakers it is advised to back them off a little before using this mixfile.