Grass Valley Performer SD User Manual
Page 83
2-51
Control Panel Reference
Source Offset
This is the address of the sources controlled by the control panel.
Segments 1, 2, and 3 of switch S1 determine source offset. The
switch segments operate in binary fashion (1 most significant; 3
least) to select source offsets from 0 to 7. When a source offset of 0
is selected, Performer sources are numbered from 1 through 10. If
a source offset of 1 is selected, Performer sources are numbered
from 11 through 20. When a source offset of 2 is selected,
Performer sources are numbered 21 through 30. This sequence
continues through a source offset of 7 and sources numbered from
71 through 80.
The following table lists S1 switch settings and the resulting
source offset. An “O” indicates an
open
segment; a “C” indicates a
closed
segment.
Table 2-9. Performer Source Offset
Sources
S1 #1
S1 #2
S1 #3
1-10
O
O
O
11-20
O
O
C
21-30
O
C
O
31-40
O
C
C
41-50
C
O
O
51-60
C
O
C
61-70
C
C
O
71-80
C
C
C