HEIDENHAIN ND 1400 - Manual (Page 104)

90 QC-300 Series User’s Guide
2 Touch the units or loop count fields and perform the desired edits, then press the Finish key to save the
changes and return to the program list.
Editing tolerances
Tolerances are contained in the feature measurement data associated with each feature in the feature list.
Tolerances are initially assigned in tolerance screens when features are measured, as described in
Chapter 7: Tolerancing.
To edit tolerances:
1 Touch the Program tab, the program title and the Edit icon. Program steps will be displayed.
2 Scroll to the desired feature if necessary, then touch the feature and touch the Tol button to display the
tolerance screen.
3 Edit tolerances and then press the Finish key to save the changes and return to the program list.
Touch the Program tab... select a program and touch the Edit icon, settings will be displayed
Touch the desired feature... then touch the Tol button to display the feature tolerances