HEIDENHAIN ND 1400 - Manual (Page 148)

134 QC-300 Series User’s Guide
Extra tab functions
Space menu insert
The space insert is included in the Extra tab
to separate control functions into groups on
the tab.
Divider line menu insert
The divider line insert is included in the Extra
tab to separate control functions into groups on
the tab without using a space insert.
Data prompt function
Touch the data prompt function icon to send a user-defined measurement such as X position, Y po-
sition, radius or angle to the serial port, USB printer or USB drive as a file. When the user touches
the data prompt function icon, a prompt message is displayed and the user selects the desired piece
of measurement data to be transmitted.
Axis position
Touch the axis position function icon to send X position, Y position or Z position data to the serial
port, USB printer or USB drive as a file.
Angle
Touch the angle function icon to send angle data to the serial port, USB printer or USB drive as a
file.
Diameter
Touch the diameter (or radius) function icon to send diameter (or radius) data to the serial port,
USB printer or USB drive as a file.
Rotate coordinate system
Touch the rotate coordinate system icon to rotate the 3D coordinate system around an axis. When
the user touches the rotate coordinate system icon, a prompt message is displayed and the user
selects the desired axis of rotation.
Extra tab divided by space into data and CNC groups
Extra tab divided by line into data and CNC groups