HEIDENHAIN ND 1400 - Manual (Page 78)

64 QC-300 Series User’s Guide
Perpendicular/parallel/tangent features
Line features can be constructed that are perpendicular, parallel or tangent to other linear or positional
features. In these examples, a line is constructed through a point that is perpendicular to another line and
a line is constructed that is tangent to two circles.\
Perpendicular line example
Tangent line example
Select the line feature type... select the two parent features... then press the Finish key
Select the line feature type... select the two parent features... then press the Finish key