HEIDENHAIN TNC 640 (34059x-02) ISO programming - Manual (Page 384)

Programming: Multiple Axis Machining
12.2 The PLANE Function: Tilting the Working Plane (Software Option 1)
12
384
TNC 640 | User's Manual for DIN/ISO Programming | 5/2013
Input parameters
Axis angle A?: Axis angle
to which the A axis
is to be tilted. If entered incrementally, it is the
angle
by which
the A axis is to be tilted from its
current position. Input range: –99999.9999° to
+99999.9999°
Axis angle B?: Axis angle
to which
the B axis
is to be tilted. If entered incrementally, it is the
angle
by which
the B axis is to be tilted from its
current position. Input range: –99999.9999° to
+99999.9999°
Axis angle C?: Axis angle
to which
the C axis
is to be tilted. If entered incrementally, it is the
angle by which the C axis is to be tilted from its
current position. Input range: –99999.9999° to
+99999.9999°
Continue with the positioning properties, See
"Specifying the positioning behavior of the PLANE
function", page 385
Abbreviations used
Abbreviation Meaning
AXIAL In the axial direction
NC block
5 PLANE AXIAL B-45 .....