HEIDENHAIN TNC 640 (34059x-02) ISO programming - Manual (Page 409)

Pallet Management 13.1
13
TNC 640 | User's Manual for DIN/ISO Programming | 5/2013
409
Screen layout for executing pallet tables
You can have the TNC display the program contents and pallet file
contents on the screen together by selecting the screen layout
PGM + PALLET. During execution, the TNC then shows program
blocks to the left and the pallet to the right. To check the program
contents before execution, proceed as follows:
Select a pallet table
With the arrow keys, choose the program you would like to
check
Press the OPEN PGM soft key: the TNC displays the selected
program on the screen. You can now page through the program
with the arrow keys
To return to the pallet table, press the END PGM soft key