HEIDENHAIN TNC 640 (34059x-02) ISO programming - Manual (Page 581)

Overview tables 19.4
19
TNC 640 | User's Manual for DIN/ISO Programming | 5/2013
581
M Effect Effective at block... Start End Page
M101
M102
Automatic tool change with replacement tool if maximum tool life has
expired
Reset M101
■
■
170
M107
M108
Suppress error message for replacement tools with oversize
Reset M107
■
■
170
M109
M110
M111
Constant contouring speed at cutting edge (feed rate increase and
reduction)
Constant contouring speed at cutting edge (only feed rate reduction)
Reset M109/M110
■
■
■
323
M116
M117
Feed rate in mm/min on rotary axes
Reset M116
■
■
391
M118
Superimpose handwheel positioning during program run ■ 326
M120
Pre-calculate the radius-compensated contour (LOOK AHEAD) ■ 324
M126
M127
Shorter-path traverse of rotary axes:
Reset M126
■
■
392
M128
M129
Maintaining the position of the tool tip when positioning with tilted axes
(TCPM)
Reset M128
■
■
394
M130 Within the positioning block: Points are referenced to the untilted
coordinate system
■ 318
M138 Selection of tilted axes ■ 397
M140 Retraction from the contour in the tool-axis direction ■ 328
M143
Delete basic rotation ■ 330
M144
M145
Compensating the machine’s kinematic configuration for ACTUAL/
NOMINAL positions at end of block
Reset M144
■
■
398
M141
Suppress touch probe monitoring ■ 329
M148
M149
Automatically retract tool from the contour at an NC stop
Reset M148
■
■
331