HEIDENHAIN TNC 640 (34059x-02) ISO programming - Manual (Page 560)

Tables and overviews
19.1 Machine-specific user parameters
19
560
TNC 640 | User's Manual for DIN/ISO Programming | 5/2013
Parameter list
Parameter settings
DisplaySettings
Settings for screen display
Sequence of displayed axes
[0] to [5]
Depends on available axes
Type of position display in position window
NOMINAL
ACTUAL
REF ACTL
REF NOML
LAG
DIST
Type of position display in position window
NOMINAL
ACTUAL
REF ACTL
REF NOML
LAG
DIST
Definition of decimal separation characters for position display
.
Display of feed rate in Manual Operation mode
at axis key: Only show feed rate when axis-direction key is pressed
always minimum: Always show feed rate
Display of spindle position in the position display
during closed loop: Only show spindle position when spindle is in position control
during closed loop and M5: Show spindle position when spindle is in position
control and with M5
Show or hide soft key Preset table
True: Soft key Preset table is not shown
False: Display soft key Preset table