Yaskawa SI-EP3 PROFINET Technical Manual - Manual (Page 18)

5 Installation Procedure
18 YASKAWA ELECTRIC SIEP C730600 69A 1000-Series Option SI-EP3 Technical Manual
8. Replace and secure the front covers of the drive (C, F) and replace the digital operator (D).
Figure 9
Figure 10 Replace the Front Covers and Digital Operator
Note: Take proper precautions when wiring the option so that the front covers will easily fit back onto the drive. Make sure no cables
are pinched between the front covers and the drive when replacing the covers.
9. Set drive parameters in Table 6 for proper option performance. Be sure to set parameter F6-30 to a node
address unique to the network.
 GSD Files
To facilitate network implementation, obtain a GSD file from one of the following websites depending on your region:
US: http://www.yaskawa.com
Europe: http://www.yaskawa.eu.com
Japan: http://e-mechatronics.com
Other areas: Contact your Yaskawa representative
F
C
D
A1000
PROFINET_E_conditional.book 18 ページ ２０１５年２月２５日 水曜日 午後５時１７分