Yaskawa SI-EP3 PROFINET Technical Manual - Manual (Page 43)

9 Web Interface
YASKAWA ELECTRIC SIEP C730600 69A 1000-Series Option SI-EP3 Technical Manual 43
 Parameter Access Tab
The Parameter Access tab allows the user to read and write parameters from the drive. Write access is restricted until a
valid password is entered.
Figure 17
Figure 18 Parameter Access Tab View
The MEMOBUS/Modbus address for the drive parameter being accessed must be entered in hexadecimal. The number
must begin with “0x” to signify hexadecimal.
Clicking “Read” will load and display the current value of the given MEMOBUS/Modbus Address. Clicking “Set” will
save the given value to the given MEMOBUS/Modbus address.
After a “Read” or “Set” command is given, Status will display “Waiting” while the action is being carried out, then
“Complete” is displayed when finished.
 Configuration Tab
The Configuration tab sets web page behavior parameters. Access is restricted unless a valid password is entered.
Figure 18
Figure 19 Configuration Tab View
sample@sample.
PROFINET_E_conditional.book 43 ページ ２０１５年２月２５日 水曜日 午後５時１７分