Yaskawa PROFINET - Manual (Page 6)

6 YASKAWA SIEP YEACOM 07A 1000-Series Option PROFINET SI-EP3 Technical Manual
2 Product Overview
2 Product Overview
‹ About This Product
The SI-EP3 option connects the 1000-series drives to a PROFINET network and facilitates the exchange of data.
This manual explains the handling, installation and specifications of this product.
The SI-EP3 option is a simple, networking solution that reduces the cost and time to wire and install factory automation
devices, while providing interchangeability of like components from multiple vendors.
By installing the option to a drive, it is possible to do the following from a PROFINET master device:
• Operate the drive
• Monitor the operation status of the drive
• Change parameter settings.
SI-EP3 is PROFINET Conformance Class A certified.
‹ Applicable Models
The option can be used with the drive models in Table 1 .
Table 1 Applicable Models
Drive Series Drive Model Number Software Version <1>
<1> See “PRG” on the drive nameplate for the software version number.
A1000
CIMR-A†2A††††
VSA90101†
CIMR-A†4A††††
CIMR-A†5A††††
VSA90504†
VSA90101†
CIMR-A†4A0930~1200 VSA903014 and later
iQpump1000
CIMR-PW2A††††
VSA8550 and later CIMR-PW4A††††
CIMR-PW5A††††
CIMR-PW4A0930~1200 VSA903750 and later
P1000
CIMR-PU2A††††
VSA8500 and later CIMR-PU4A††††
CIMR-PU5A††††
CIMR-PU4A0930~1200 VSA903700 and later