Yaskawa PROFINET - Manual (Page 8)

8 YASKAWA SIEP YEACOM 07A 1000-Series Option PROFINET SI-EP3 Technical Manual
4 Option Components
4 Option Components
‹ SI-EP3 PROFINET Option
Figure 1
Figure 1 Option (Top View)
‹ Terminal CN1
The communication connector on the option is a modular RJ45 female connector designated CN1.
CN1 is the connection point for a customer supplied male Ethernet network communication cable.
Table 2 Male, 8-way Ethernet Modular Connector (Customer Supplied)
A – Ground Terminal and installation hole <1> H – PROFINET cable connection
B – CN1 Port 2 LED (10/100) <2>
<1> The ground wire provided in the option shipping package must be connected during installation
I – Option connector CN5
C – CN1 Port 2 J – Installation hole
D – CN1 Port 2 LED (LINK/ACT) <2> K – SI-EP3 Firmware Label VST-††††
E – CN1 Port 1 LED (10/100) <2> L – LED (NS) <2>
F – CN1 Port 1 M – LED (MS) <2>
G – CN1 Port 1 LED (LINK/ACT) <2>
<2> Refer to Option LED Display on page 9 for details on the LEDs
N – PROFINET PCB
Male Ethernet 8-Way Modular Connector Pin Description
1 (Pair 2) Transmit data (TXD) +
2 (Pair 2) Transmit data (TXD) -
3 (Pair 3) Receive data (RXD) +
4 (Pair 1) Not used <1>
<1> Not used for 10 Mbps and 100 Mbps networks.
5 (Pair 1) Not used <1>
6 (Pair 3) Receive data (RXD) -
7 (Pair 4) Not used <1>
8 (Pair 4) Not used <1>
N
A
I
H
G
E
B
D
F
C
J
L
K
M
Underside