Yaskawa FSP Short Form - Manual (Page 11)

FSP Amplifier Short Form Installation Guide Introduction
WARNING
• Do not damage, press and exert excessive force or place heavy objects on the
cables.
Failure to observe this warning may result in electric shock, stoppage of operation, or burning.
• Do not modify the product.
Failure to observe this warning may result in injury or damage to the product.
• Provide an appropriate stopping device on the machine side to ensure safety.
A holding brake for a servomotor with brake is not a stopping device for
ensuring safety.
Failure to observe this warning may result in injury.
• Do not come close to the machine immediately after resetting momentary
power loss to avoid an unexpected restart. Take appropriate measures to
ensure safety against an unexpected restart.
Failure to observe this warning may result in injury.
Checking on Delivery
CAUTION
• Always use the servomotor and the FSP Amplifier in one of the specified
combinations.
Failure to observe this caution may result in fire or malfunction.
Storage and Transportation
CAUTION
• Do not store or install the product in the following locations.
Locations subject to direct sunlight.
Locations subject to temperatures outside the range specified in the
storage/installation temperature conditions.
Locations subject to humidity outside the range specified in the
storage/installation humidity conditions.
Locations subject to condensation as the result of extreme changes in
temperature.
Locations subject to corrosive or flammable gases.
Locations subject to dust, salts or iron dust.
Locations subject to exposure to water, oil or chemicals.
Locations subject to shock or vibration.
Failure to observe this caution may result in fire, electric shock, or damage to the product.
11