Single-phase 200v 0.8kw and 1.5kw main circuit, Single-phase 200 v 0.8 kw and 1.5 kw m ain circuit – Yaskawa FSP Short Form User Manual
Page 30
Advertising
FSP Amplifier Short Form Installation Guide
Wiring
5.4.2. Single-phase 200V 0.8kW and 1.5kW Main Circuit
FSP Amplifier
1Ry
:
Relay
1QF : Molded-case circuit breaker 1PL : Indicator lamp
FIL : Noise filter
1SUP : Surge suppressor
1KM : M agnetic contactor
1D : Flywheel diode
*1. T hese circuits are power lines. Do not touch these terminals when the
power is ON to avoid electric shock.
*2. T hese circuits are SELV circuits and are separated from all other
circuits by double and reinforced insulation. T he CN1 input signal is
available for sink or source circuits.
Note: Customers must purchase a 24 VDC power supply with a double-
shielded enclosure.
30
Advertising