3 receiving, Option package contents, Tools required for installation – Yaskawa AC Drive V1000-Series Option SI-M3/V CompoNet User Manual
Page 10: 3receiving
10
YASKAWA ELECTRIC TOBP C730600 54A V1000 Option CompoNet Installation Manual
3 Receiving
3
Receiving
Please perform the following tasks after receiving the option:
• Inspect the option for damage. Contact the shipper immediately if the option appears
damaged upon receipt.
• Verify receipt of the correct model by checking the model number printed on the option
nameplate (
Refer to Top Views of Option on page 11
• Contact your supplier if you have received the wrong model or the option does not
function properly.
◆
Option Package Contents
◆
Tools Required for Installation
A Phillips screwdriver (M3 metric/#1, #2 U.S. standard size*) is required to install the
option and remove drive front covers.
*Screw sizes vary by drive capacity. Select a screwdriver appropriate for the drive capacity.
Note: Tools and parts required to prepare option networking cables for wiring are not listed in this
manual. Refer to the ODVA website for more information.
Description:
Option Unit
Ground Wire
Warning Labels
Installation Manual
_
Quantity:
1
4
1
1
MANUAL