Yaskawa AC Drive V1000-Series Option SI-M3/V CompoNet - Manual (Page 22)

5 Installation Procedure
22 YASKAWA ELECTRIC TOBP C730600 54A V1000 Option CompoNet Installation Manual
8.
On NEMA Type 1 enclosure drives, the screw for the drive ground terminal also acts
as one of the screws that attaches the NEMA Type 1 conduit bracket to the drive.
Reattach the NEMA Type 1 conduit bracket according to Figure 11 and connect the
drive-side of the ground wire to the drive ground terminal.
Note: The four different ground wires packaged with the option connect the option to different drive
models. Select the proper ground wire depending on drive size.
Figure 11
Figure 11 Reattach the NEMA Type 1 Conduit Bracket and Connect the Ground Wire
Ground terminal
Ground wire
Drive ground terminal/
NEMA Type 1 conduit
bracket screw
Ground wire
Drive-side
connector
Screw size:
M3.5 to M6 Option unit
connector
Screw size: M3