Yaskawa AC Drive V1000-Series Option SI-M3/V CompoNet - Manual (Page 25)

5 Installation Procedure
YASKAWA ELECTRIC TOBP C730600 54A V1000 Option CompoNet Installation Manual 25
12.
Attach the option to the drive. Properly seat the tabs on the left and right sides of the
option to the drive case.
Figure 16
Figure 16 Connect the Option
13.
Connect the ground wire at the option ground terminal. Tighten the screw to
0.5 ~ 0.6 Nm or (4.4 ~ 5.3 in lbs) using an M3 Phillips screwdriver. Firmly plug the
CompoNet cable connector into the option.
Figure 17
Figure 17 Connect the Ground Wire and CompoNet Cable Connector to the Option
Line up tabs
Line up tabs
Option ground
terminal