Yaskawa V1000-Series Option SI-EP3/V PROFINET - Manual (Page 10)

10 YASKAWA SIEP YEACOM 06A V1000 Option PROFINET SI-EP3/V Technical Manual
4 Option Components
4 Option Components
 SI-EP3/V PROFINET Option
Figure 1
Figure 1 Top Views of Option
 Dimensions with Option Added- IP00/IP20 Open Chassis and IP20/NEMA Type 1
The installed option adds 27 mm (1.06 in.) to the total depth of the drive.
Figure 2
Figure 2 Dimensions
A – LED (MS) <1> K – Port 2 LED (10/100) <1>
B – LED (NS) <1> L – Port 2
C – Option cover M – Port 2 LED (LINK/ACT) <1>
<1> Refer to Option LED Display on page 11 for details on the LEDs.
<2> One of the four ground wires packaged with the option must be connected during installation.
D – PROFINET PCB N – Port 1 LED (10/100) <1>
E – Screw hole (attaching option cover) O – Port 1
F – Nameplate P – Port 1 LED (LINK ACT) <1>
G – Functional Earth cable connection (FE) Q – PROFINET cable connection
H – Mounting tabs R – Option connector (CN5)
I – Ground wire <2> S – Option Firmware Label (VST)
J – Pass-through hole for ground wire
A
B
C
H
E
D
H
G
I
J
R
F
Q
00000000000000
SI-EP3/V
1XXX
P N K M
O L
S
Option with cover removed
CN5 connector port
Option with cover attached Option Underside
27 mm (1.06 in.)