Yaskawa V1000-Series Option SI-EP3/V PROFINET User Manual
Page 24
Advertising
6 Procedure A
24
YASKAWA SIEP YEACOM 06A V1000 Option PROFINET SI-EP3/V Technical Manual
18.
Attach the option cover by aligning the tabs with the mounting holes, seat the front cover into place, and tighten
the screw on the front.
Figure 25
Figure 25 Attach the Option Cover
NOTICE: Damage to Equipment. Take proper precautions when wiring the option so that the front covers will easily fit back onto the
drive. Make sure no cables are pinched between the front covers and the drive when replacing the cover. Failure to comply may result
in damage to circuitry and equipment.
19.
Set drive parameters in
on page
for proper option performance.
20.
End of installation Procedure A.
Line up tabs
Advertising