Epson ARM.POWERED ARM720T - Manual (Page 30)

1: Introduction
1-10 EPSON ARM720T CORE CPU MANUAL
Addressing mode 2, <a_mode2>, is shown in Table 1-3.
Coprocessors Data operations CDP{cond} p<cpnum>, <op1>, <CRd>, <CRn>,
<CRm>, <op2>
Move to ARM reg from coproc MRC{cond} p<cpnum>, <op1>, <Rd>, <CRn>,
<CRm>, <op2>
Move to coproc from ARM reg MCR{cond} p<cpnum>, <op1>, <Rd>, <CRn>,
<CRm>, <op2>
Load LDC{cond} p<cpnum>, <CRd>, <a_mode5>
Store STC{cond} p<cpnum>, <CRd>, <a_mode5>
Software
Interrupt SWI <24bit_Imm>
Table 1-3 Addressing mode 2
Operation Assembler
Immediate offset [<Rn>, #+/-<12bit_Offset>]
Register offset [<Rn>, +/-<Rm>]
Scaled register offset [<Rn>, +/-<Rm>, LSL #<5bit_shift_imm>]
[<Rn>, +/-<Rm>, LSR #<5bit_shift_imm>]
[<Rn>, +/-<Rm>, ASR #<5bit_shift_imm>]
[<Rn>, +/-<Rm>, ROR #<5bit_shift_imm>]
[<Rn>, +/-<Rm>, RRX]
Pre-indexed immediate offset [<Rn>, #+/-<12bit_Offset>]!
Pre-indexed register offset [<Rn>, +/-<Rm>]!
Pre-indexed scaled register offset [<Rn>, +/-<Rm>, LSL #<5bit_shift_imm>]!
[<Rn>, +/-<Rm>, LSR #<5bit_shift_imm>]!
[<Rn>, +/-<Rm>, ASR #<5bit_shift_imm>]!
[<Rn>, +/-<Rm>, ROR #<5bit_shift_imm>]!
[<Rn>, +/-<Rm>, RRX]!
Post-indexed immediate offset [<Rn>], #+/-<12bit_Offset>
Post-indexed register offset [<Rn>], +/-<Rm>
Post-indexed scaled register offset [<Rn>], +/-<Rm>, LSL #<5bit_shift_imm>
[<Rn>], +/-<Rm>, LSR #<5bit_shift_imm>
[<Rn>], +/-<Rm>, ASR #<5bit_shift_imm>
[<Rn>], +/-<Rm>, ROR #<5bit_shift_imm>
[<Rn>, +/-<Rm>, RRX]
Table 1-2 ARM instruction summary (continued)
Operation Assembler