Emerson Liebert Static Transfer Switch - Manual (Page 101)

Liebert STS2 Touch Screen Display
93
System Settings
The System Settings choice under the Config menu displays another pop-up menu with three choices:
• Comm Options
• System Options
• System ID
To access the System Settings menu:
1. Select CONFIG from the menu bar.
2. Select SYSTEM SETTINGS from the Config menu.
Comm Options
The Comm Options dialog box allows you to configure the communications settings for the Liebert
STS2.
• Select COMM OPTIONS from the System Settings Menu.
The Comm Options dialog box is displayed. See Figure 55.
• An option can be enabled by selecting YES.
• An option can be disabled by selecting NO.
• An option can be configured by selecting the adjacent option button to display a separate con-
figuration dialog box.
The instructions for configuring the communications options are provided in this section.
Figure 55 Comm options dialog box
Option
buttons