Nikon KeyMission 170 - Manual (Page 73)

54
Connecting the Camera to a TV or Computer
Utilizing Images
In addition to using the SnapBridge 360/170 app ( Aiii) to enjoy the captured images,
you can also utilize the images in various ways by connecting the camera to the
devices described below.
B
Notes About Connecting Cables to the Camera
• Make sure to turn the camera off before connecting or disconnecting cables. Check the shape
and direction of the plugs and do not insert or remove the plugs at an angle.
• Make sure that the camera battery is sufficiently charged. If the EH-62F AC Adapter
(available separately) is used, this camera can be powered from an electrical outlet. Do
not, under any circumstances, use an AC adapter other than the EH-62F. Failure to observe
this precaution could result in overheating or damage to the camera.
• For information about the connection methods and subsequent operations, refer to the
documentation included with the device in addition to this document.
Utilizing Images
Viewing Images on a TV
Images and movies captured with the camera can be viewed on a TV.
Connection method: Connect a commercially available HDMI cable
to the TV’s HDMI input jack.
Transferring Images to a Computer (KeyMission 360/170 Utility)
You can transfer images and movies to a computer for viewing and
editing.
Connection method: Connect the camera to the computer’s USB port
with the USB cable.
• Before connecting to a computer, install KeyMission 360/170 Utility
on the computer.
Open the battery-chamber/memory card slot cover.
Micro-USB connector
HDMI micro connector
(Type D)