Nikon KeyMission 170 - Manual (Page 76)

57
Connecting the Camera to a TV or Computer
Transferring Images to a Computer (KeyMission 360/170 Utility)
B
Notes About Connecting the Camera to a Computer
Disconnect all other USB-powered devices from the computer. Connecting the camera and
other USB-powered devices to the same computer simultaneously may cause a camera
malfunction or excessive power supply from the computer, which could damage the
camera or memory card.
2
Start KeyMission 360/170 Utility.
• Images saved in the camera are displayed.
• If the memory card contains a large number of images, it may take a while for
KeyMission 360/170 Utility to start. Wait until KeyMission 360/170 Utility starts.
3
Select the images that you want to transfer, and click x.
• When the storage destination of the images is selected on the screen that is
displayed, image transfer begins.
4
Terminate the connection.
• If you are using a card reader or card slot, choose the appropriate option in the
computer operating system to eject the removable disk corresponding to the
memory card and then remove the memory card from the card reader or card slot.
• If the camera is connected to the computer, turn the camera off and disconnect the
USB cable.
B
Notes About Connecting the USB Cable
Operation is not guaranteed if the camera is connected to the computer via a USB hub.
C
Using KeyMission 360/170 Utility
See the KeyMission 360/170 Utility online help for more information.
C
ViewNX-i
Free software ViewNX-i also enables you to transfer images and movies to your computer.
Download the software from our Download Center at the URL below.
http://downloadcenter.nikonimglib.com