RISCO Group ACIS User Manual
Page 43
Advertising
![background image](/files/858566/content/doc043.png)
User Manual for ACIS Version
Uncontrolled when printed
© RISCO Group
34
Field Name
Description
Relay Mode
You can change the Relay Mode. For details on Relay
mode, refer to
Table 9: Relay Modes
Pulse Duration
By default, Pulse Duration is 10 seconds. You can change
the duration. The time duration for which the relay is in
the ON state.
Activation Delay
The time duration for which the Relay will be off and
applied in continuous impulse
4.1.3
Configure Sensor Details
The external sensors, which are not connected to a door, are displayed.
To configure Sensor Details:
1. Click the Sensor Details tab. The external sensors appear. The Sensor ID and Sensor Name are displayed.
Advertising