RISCO Group ACIS - Manual (Page 74)

User Manual for ACIS Version
Uncontrolled when printed © RISCO Group 65
5. Click Restart. The message appears.
Figure 52: Restart Message
6. Click OK. The message appears, “Restart command sent to device”.
7. Click Factory Reset. All configurations on the Controllers are reset and the manufacturer’s default
configuration is restored.
8. Click Perform Built-in-Test. The diagnostic report stating the overall health of the controller appears.
Figure 53: Built in Test Report

The Memory information, CPU Information, Virtual Memory Statistics, Stack Memory, RAM Information, Flash
Information, Active/Backup Proxy Connections, Access Authorisation Data Count, ACIB Communication Status
and Hardware Information about the Controller is displayed.
Click
(Copy to Clipboard) to copy the log to clipboard and paste it in a notepad to get a better view of
the information.
Click Cancel to return to the Home Page.