Rosen Aviation 9000 Series : 9 inch High Definition SlimLine - Manual (Page 10)

Rosen Aviation Personal Displays
Document Number: 104461 Revision: F
Date: 03/13/14
Template: 4.4.1.6FM2; Revision A; 12/06/12 Page 10 of 32
4.3. Base Installations
The bases mount on either a vertical or a horizontal surface, typically with a minimum of four
screws (two per flange); however, the rectangular bases require only two screws.
 A ground wire is present in all base harnesses
 For base pinout information, refer to the monitor drawings

We suggest connecting bases using shielded harnesses to improve EMI performance.
Figure 8 Mounting dimensions for the 0100-342 base receptacle
Figure 9 mounting dimensions for the 0100-140 base receptacle (right)
Figure 10 Mounting dimensions for the 0100-139 base receptacle (left)
Attach a
grounding strap
to the stud on
the 0100-342
base receptacle