Rosen Aviation 9000 Series : 9 inch High Definition SlimLine - Manual (Page 19)

Rosen Aviation Personal Displays
Document Number: 104461 Revision: F
Date: 03/13/14
Template: 4.4.1.6FM2; Revision A; 12/06/12 Page 19 of 32
7.3.4.1.1. Color Levels: Red, Green, Blue
Setting the Color Temperature to User will make the Red, Blue, and Green options
active. Each color adjusts the low-level registers of its respective color value in the
picture.
Select the Image AdjustAdvanced Menu, press – and then Menu to access Color
Temperature. Set Color Temperature to User, and then press Menu.
Press – to choose a color level, and then press Menu to open a control bar to
adjust the value, similar to Figure 26 shown below.
 Red
: Press – to show more cyan-colored tones, and press + to intensify the
red tones.

Green
: Press – to show more magenta tones, and press + to intensify the
green tones.
 Blue
: Press – to show more yellow tones, and press + to intensify the blue
tones.
Press Menu to set the color and close the control bar.
Select BackExit to close the OSD.
Figure 26 Sample color-level control bar
7.3.4.2. Restore Defaults
This option restores the default screen settings from the user menus for all video
sources. It does not erase Technician Menu settings or change the internal time and
date. A Defaults Restored message appears in the lower corner of the menu after the
restore is complete.
Figure 27 Restore Defaults option
Status
message