Installing/removing slimline arm assemblies, Locking a slimline arm, Installing/removing rectangular arm assemblies – Rosen Aviation 9000 Series : 9 inch High Definition SlimLine User Manual
Page 8
Rosen Aviation
Personal Displays
Document Number: 104461
Revision: F
Date: 03/13/14
Template: 4.4.1.6FM2; Revision A; 12/06/12
Page 8 of 32
4.1. Installing/Removing SlimLine Arm Assemblies
To install a SlimLine arm assembly, press the arm button all the way in and push straight down
on the arm into the plug body.
Figure 4 SlimLine locking arm feature
To remove a SlimLine arm assembly, press the arm button in all the way and lift up under the
arm.
4.1.1. Locking a SlimLine Arm
To rotate a SlimLine locking arm so that the display rotates, press the arm button in only
halfway.
Rotate the display/arm until it locks into the next position, and then release the arm
button to lock in the position.
4.2. Installing/Removing Rectangular Arm Assemblies
To install a rectangular arm assembly, raise the base lid, and align the arm slot towards the
base’s dowel pin
. To remove a rectangular arm assembly, press the latch button in and lift the
assembly straight up from the base.
Figure 5 Removing a rectangular arm assembly
Arm button
Plug body
Latch button
Base lid
Dowel pin
Arm slot