Rosen Aviation 9000 Series : 9 inch High Definition SlimLine - Manual (Page 15)

Rosen Aviation Personal Displays
Document Number: 104461 Revision: F
Date: 03/13/14
Template: 4.4.1.6FM2; Revision A; 12/06/12 Page 15 of 32
The available menu options will vary depending on which source signal is active.
 Press Menu to choose a setting or an option.
 Select the Back option in the OSD to switch menu pages.
 Press Exit to close the OSD and save settings.
Note:
The on-screen display will timeout and close automatically after no screen activity for a
preset amount of time, which is adjustable on the Technician MenuOSD Timeout option.
See Section 8.4 , OSD Timeout , on page 25 .
7.1. Exit
Use Exit to close the OSD. When you press Menu on the front panel, the OSD opens to this
screen, as shown below. Press Menu again to close the OSD from this screen.
Press + and – to access the other menu pages in the OSD.
From other settings within the OSD, select Back and Exit to close the OSD.
Figure 19 Opening screen for the Main Menu
7.2. User Menu
The Main Menu opens to the screen, shown in Figure 19 (above). Press – to access the User
menu options.
Press + and – to select a User option and press Menu to change its value.
Figure 20 User menu options
Select back to
return to the menu
pages