Image adjust, Scheme, Picture-quality controls – Rosen Aviation 9000 Series : 9 inch High Definition SlimLine User Manual
Page 17: Reset scheme
Rosen Aviation
Personal Displays
Document Number: 104461
Revision: F
Date: 03/13/14
Template: 4.4.1.6FM2; Revision A; 12/06/12
Page 17 of 32
7.3. Image Adjust
Use the Image Adjust menu pages, as shown below, to control the color and picture quality.
Highlight Image Adjust and press + to highlight the options, and then press Menu to change the
option values.
Figure 22 Image Adjust menu page
7.3.1. Scheme
Scheme is also available from the Main MenuUser page. For information about how
this option works, see Section
. Changing the Scheme affects changes
that you make to the User menu settings and is source specific.
7.3.2. Picture-Quality Controls
The Brightness, Contrast, Saturation, Hue, and Sharpness menu options use control bars
to fine-tune different aspects of the picture quality. To adjust these options, press Menu
and – to select Image Adjust. Choose a menu option, and then press Menu to open a
control bar and adjust the value, similar to Figure 23, shown below.
Press – or + to change the brightness on the LCD accordingly.
Press Menu to set the brightness and close the control bar.
Select BackExit to close the OSD.
Figure 23 Sample picture-quality control bar
7.3.3. Reset Scheme
Restores the values of the current scheme to their default settings. Use Reset Scheme to
revert to the default screen colors if the other Image Adjust options did not correct the
screen quality changes that you expected.
Select Image AdjustReset Scheme and then press Menu.
Select BackExit to close the OSD.
For information about the different scheme modes, see Section