TA Triumph-Adler CLP 4721 - Manual (Page 123)

Using the Operation Panel
4-64
Optional Interface (Network interface card setting)
This locks and protects the network interface card (NIC). The default
setting is Unblock.
1
Press Z while >I/F Block > is displayed. >>Option I/F appears.
2
Press [OK]. A blinking question mark (?) appears.
3
Select Block or Unblock using U or V.
4
Press [OK].
5
Press [MENU]. The display returns to Ready.
NetWare (NetWare setting)
NetWare is a PC-based network operating system specifically for servers.
NetWare is a client-server system that operates by installing the NetWare
OS on the server and dedicated client modules (NetWare clients) on the
client machines (running MS-DOS, OS/2, Windows, etc.). The basic
network layer protocol used is NetWare's own IPX (Internetwork Packet
eXchange)/SPX (Sequenced Packet eXchange), but the system also
supports TCP/IP.
The feature of the NetWare OS is that it is specifically for servers, unlike
general-purpose operating systems such as Windows NT and UNIX.
Only the minimum required for server operation can be performed from
the NetWare OS console on the server. Server and file management is
basically carried out using management tools from the clients. Also, all
drivers and protocol stacks are in the form of modules called NetWare
Loadable Modules (NLMs), and the ability of NLMs to load and unload
flexibly and dynamically is a major advantage of this system.
The default setting is On.
1
After entering the administrator ID and password, press U or V
repeatedly until >NetWare > appears.
2
Press [OK]. A blinking question mark (?) appears.
3
Select On or Off using U or V.
4
Press [OK].
5
Press [MENU]. The display returns to Ready.
Frame Type (Frame type setting)
Sets the NetWare frame type. Frame is a term referring to a set of data
that flows through the network. The default setting is Auto.
Note Option I/F is displayed only when the optional network
interface is installed on the printer.
>>Option I/F
? Unblock
Note Check with your network administrator when selecting
network settings.
>NetWare >
>NetWare >
? On