TA Triumph-Adler CLP 4721 - Manual (Page 31)

Printing Operation
2-6
Custom Mode
Use Custom Mode if you want to specify the printer port and select the
software to be installed.
For example, if you do not want fonts installed on your computer to be
overwritten, select Custom Mode and deselect the Fonts checkbox on
the Utility tab of the Custom Install screen.
1
Select Custom Mode.
2
Following the instructions in the install wizard window, select the
software packages to be installed and the specify the port, etc.
Installation on a Macintosh
1
Turn on the printer and the Macintosh.
2
Insert the included CD-ROM ( Product Library) into the CD-ROM
drive.
3
Double-click the CD-ROM icon.
4
Double-click either OS X 10.2 and 10.3 Only, OS X 10.4 Only or OS
X 10.5 or higher depending on your Mac OS version.
Note Before installing the software, check the following
settings on the printer:
• Emulation (Setting the emulation) on page 4-40 is set to
KPDL
or KPDL(Auto).
• Bonjour (Bonjour setting) on page 4-49 is set to On.
5
Double-click (Brand Name) OS X x.x.
This completes the printing system driver installation procedure.
Follow the on-screen instructions to restart the system, if required.
For details, refer to Custom Installation in the Printing System Driver
User Guide on the CD-ROM.