TA Triumph-Adler CLP 4721 - Manual (Page 49)

Handling Paper
3-8
Special Paper
The following types of special paper can be used:
Use paper that is sold specifically for use with copiers or printers (heat-
fusing type). When using transparencies, labels, thin paper, envelopes,
postcards, or thick paper, feed the paper from the MP tray. For details,
refer to Paper Source (Selecting the paper feed source) on page 4-37.
Since the composition and quality of special paper vary considerably,
special paper is more likely than white bond paper to give trouble during
printing. No liability will be assumed if moisture and so forth given off
during printing on special paper causes harm to the machine or operator.
Transparency
Transparencies must be able to withstand the heat of fusing during the
printing process. The recommended transparency product is 3M CG3700
(Letter, A4).
The table below lists the specifications for transparency:
Paper Type to be Used Paper Type to be Selected
Thin paper (60 to 64 g/m²)
VELLUM
Thick paper (90 to 220 g/m²)
THICK
Colored paper
COLOR
Recycled paper
RECYCLED
Overhead projector transparencies
TRANSPARENCY
Postcards
CARDSTOCK
Envelopes
ENVELOPE
Label
LABELS
Coated paper
COATED
Note Before purchasing any type of special paper, test a sample
on the machine and check that printing quality is satisfactory.
Item Specification
Tolerance of heat Must tolerate at least 190 °C (374 °F)
Thickness 0.100 to 0.110 mm (3.9 to 4.3 mils)
Material Polyester
Dimensional accuracy ±0.7 mm (±0.0276 inches)
Squareness of corners 90° ±0.2°