Subaru Robin EX35 User Manual
Page 28
- 24 -
Fig.5-23
Fig.5-24
Step
Parts to remove
Remarks and procedures
Fasteners
24
Cylinder head,
Chain guide
(1) Remove the cylinder head from the crankcase.
(2) Remove the cylinder head gasket from the cylinder head.
Take care not to lose the dowel pin.
(3) Remove the chain guide from the top side of the
crankcase.
(If the chain guide is removed from the inner side of the
crankcase, it might be damaged.)
12 mm box spanner
M10 × 75mm : 4 pcs.
M8 × 35mm : 2 pcs.
25
Intake and exhaust
valves
(1) Remove the collet valve from the spring retainer.
(See Fig. 5-24)
(2) Remove the intake valve and the exhaust valve.
INTAKE
VALVE
VALVE SPRING
COLLET VALVE
SPRING RETAINER
GASKET
EXHAUST
VALVE
CYLINDER HEAD
VALVE SPRING
COLLET VALVE
SPRING RETAINER
STEM SEAL
(INTAKE ONLY)
CHAIN GUIDE
PUSH
M8 x 35 BOLT : 2 pcs.
M10 x 75 BOLT : 4 pcs.
DOWEL PIN
DOWEL PIN
RETAINER PLATE
(EXHAUST ONLY)
STEP 24
STEP 25