Amprobe GP-2 Geo-Test - Manual (Page 27)

GP-2 GeoTest
EN - 27
7. CONNECTING THE INSTRUMENT TO A PC
Connect the instrument to a PC through the RS-232 port with the supplied cable.
Refer to software manual for information how to set up software for download.
In order to transfer recorded data to a PC follow this procedure:
Position the switch on RS232.
Proceed as indicated in the manual of the management software.
Se Se
NOTE! the transmission speed of the GP-2 is 9600 baud (see software manual).
NOTE! On RS232, the instrument will switch off automatically 2 minutes after the last
selecting command from a PC. .