Amprobe GP-2 Geo-Test - Manual (Page 8)

GP-2 GeoTest
EN - 8
3. PREPARING THE INSTRUMENT
3.1. INITIAL CHECK
This instrument has been carefully checked for proper electrical and mechanical function
prior to shipment. All possible precautions have been taken in order to deliver it in the best
possible condition.
Nevertheless, on receipt of the instrument we suggest that it be checked completely to
make sure that no damage has occurred in transit. Should you find anomalies please
contact the carrier immediately.
Please also make sure that the package contains all the accessories and parts listed in
paragraph 9.3.1. In case of discrepancies please contact your dealer.
Should it be necessary to return the instrument, please refer to the instructions in
paragraph 10.
3.2. POWER SUPPLY
The instrument is powered by 6 size 'AA' 1.5V batteries ( LR6– AM3 – MN 1500) not
included in the package.
For correct installation of the batteries see paragraph 8.2.
When the batteries are low the symbol appears. For replacement see paragraph 8.2.
3.3. CALIBRATION
The instrument complies with the standards mentioned in this manual. Its performance is
guaranteed for one year from the date of purchase.
3.4. STORAGE
To guarantee accurate measurements, after extended storage in severe environmental
conditions please allow the unit to normalize to proper ambient conditions.(see
environmental conditions listed at paragraph 9.2.1).