Amprobe GP-2 Geo-Test - Manual (Page 7)

GP-2 GeoTest
EN - 7
F
Displays the average value of the earth resistivity, calculated on the
basis of all valid measurements taken.
F
Selects the distance "D" between the earth rods (
ρ
resistivity test).
F
Increases the value of the parameter D; Scrolls through the recorded
test results; or Selects the unit m/ft.
F
Decreases the value of the parameter D; Scrolls through the recorded
test results; or Selects the unit m/ft.
F
Starts a measurement.
F
Escape from (exit) the selected function or mode.
F
Saves test results.
F
Recall recorded test results.
F
Displays recorded data from the selected memory location.
F
Deletes:
- the average value of the measurements and the number of the
tests included in the average value calculations
- recorded test results from a specified memory location
AVG
GO
ESC
SAVE
DIST
RCL
DISP
CLR
s s
t t