PLANET WGSW-2620HP - Manual (Page 118)

User’s Manual of WGSW-2620HP
118
„ Binding
Let device that has specific IP address and MAC address can use network. We can set specific IP address, MAC address,
VLAN id and port id to bind, and device can cross switch if all conditions match.
Use binding function; we should enable it first in following page.
In ※Packet Type / Binding box should select ※Binding.
Object Description Default Vaule
Group ID 1 ~ 200
Action Permit / Deny.
„ Permit: Permit packet cross switch.
„ Deny: Drop packet.
Permit
VLAN Any / VID.
„ Any: Any Vlan id.
„ VID: 1~4094. A certain vlan id.
Any
Packet Type IPv4 / Non-IPv4 / Binding
„ IPv4: Set Ipv4 packet field.
„ Non-IPv4: Set non-Ipv4 packet field.
„ Binding: Set binding entry.
IPv4
MAC Address **:**:**:**:**:**
* is represent a digit from 0~9 and A~F,
*** is range from 0 to FF.
00:11:22:33:44:55
IP Address ***.***.***.***
* is represent a digit from 0~9,
*** is range from 0 to 255.
0.0.0.0
Port Id Source port id, from 1~10. 1
Current List You create ACL and Binding groups.