PLANET WGSW-2620HP - Manual (Page 178)

User’s Manual of WGSW-2620HP
178
e.g. snmp system-contact [email protected]
show snmp system
Description:
Show SNMP system information.
6.13.2 Community Strings
snmp community
Description:
Set SNMP community string.
Syntax:
snmp community <read-sysinfo-only | read-all-only | read-write-all> <community-str>
Parameters:
<community-str> specifies the community string.
e.g. snmp community read-all-only public
no snmp community
Description:
Delete SNMP community string.
Syntax:
no snmp community <community-str>
Parameters:
<community-str> specifies the community string.
e.g. no snmp community public
show snmp community
Description:
Show SNMP community strings.
6.13.3 Trap Managers
snmp trap
Description:
Set SNMP trap receiver IP address, community string, and port number.
Syntax:
snmp trap <ip-addr> [<community-str>] [<1..65535>]