PLANET WGSW-2620HP - Manual (Page 13)

User’s Manual of WGSW-2620HP
13
− Cisco ether-channel (Static Trunk)
„ Spanning Tree Protocol
- STP, IEEE 802.1D (Classic Spanning Tree Protocol)
- MSTP, IEEE 802.1s (Multiple Spanning Tree Protocol, spanning tree by VLAN)
„ Port Mirroring to monitor the incoming or outgoing traffic on a particular port
¾ Quality of Service
„ 4 priority queues on all switch ports
„ Traffic classification:
- IEEE 802.1p CoS
- IP TOS / DSCP to 802.1p priority mapping
- Port-Based priority
„ Strict priority and Weighted Round Robin (WRR) CoS policies
„ Supports QoS and In/Out bandwidth control on each port
„ In/Out rate limit control on each port
¾ Multicast
„ Supports IGMP Snooping v1 and v2
„ IGMP Snooping v2 fast leave
„ Querier mode support
¾ Security
„ IEEE 802.1x Port-Based network access control protocol
„ RADIUS users access authentication
„ L3 / L4 Access Control List (ACL)
„ Source IP-MAC / Port-Binding
„ Port Security for Source MAC address entries filtering
¾ Management
„ Switch Management Interface
- Telnet Command Line Interface
- Web switch management
- SNMP v1, v2c, v3 switch management
- SSL switch management
„ Three user privilege levels control (Admin, Operator, viewer)
„ DHCP client for IP address assignment
„ DHCP Option82 and DHCP Relay
„ Link Layer Discovery Protocol (LLDP) for easy network management
„ Built-in Trivial File Transfer Protocol (TFTP) client
„ Firmware upgrade via TFTP or HTTP
„ Configuration restore / backup via TFTP or HTTP
„ Event message logging to remote Syslog server
„ Alarm records extractable in standard CSV format for post processing
„ Four RMON groups 1, 2, 3, 9 (history, statistics, alarms, and events)
„ SNMP trap / E-Mail Alarm for interface Link Up and Link Down notification
„ Supports Ping function
„ Supports Simple Network Protocol (SNTP)