PLANET WGSW-2620HP User Manual
Page 89
Advertising
User’s Manual of WGSW-2620HP
Figure 4-5-4:
Aggregation Information of
Switch 1
Screenshot
5.
Click on the tab of Aggregator Information to check the trunked group information as the illustration shown
above after the two switches configured.
Switch 2 configuration
6. Set
System Priority
of the trunk group. For example: 1.
7. Select
a
trunk group ID
by pull down the drop-down menu bar.
8. Enable
LACP.
9. Include the member ports by clicking the Add button after selecting the port number and the column field of
Work Ports
changes automatically.
89
Advertising