PLANET WGSW-2620HP - Manual (Page 174)

User’s Manual of WGSW-2620HP
174
spanning-tree mst
Description:
Set spanning tree bridge priority of MSTI.
Syntax:
spanning-tree mst <0-15> priority <0-61440>
Parameters:
<0-15> specifies the MSTI instance ID.
<0-61440> specifies the MSTI bridge priority. The value must be in steps of 4096. Default value is 32768.
spanning-tree mst <0-15> vlan [<vlan-list>]
Description:
Set MSTI to map VLAN list.
Syntax:
spanning-tree mst <0-15> vlan [<vlan-list>]
Parameters:
<0-15> specifies the MSTI instance ID.
<vlan-list> specifies the mapped VLAN list. Null means all VLANs.
spanning-tree mst <0-15> port path-cost <1-200000000> [<port-list>]
Description:
Set spanning tree port path cost of MSTI.
Syntax:
spanning-tree mst <0-15> port path-cost <1-200000000> [<port-list>]
Parameters:
<1-200000000> specifies port path cost.
<port-list> specifies the ports to be set. Null means all ports.
spanning-tree mst <0-15> port priority <0-240> [<port-list>]
Description:
Set spanning tree port priority of MSTI.
Syntax:
spanning-tree mst <0-15> port priority <0-240> [<port-list>]
Parameters:
<0-240> specifies the port priority. The value must be in steps of 16.
<port-list> specifies the ports to be set. Null means all ports.