PLANET BSP-300 - Manual (Page 15)

User’s Manual of BSP-300
14
LED Definition
LED Status Description
Slow Blink System On.
System
Fast Blink The battery is Charging.
Slow Blink The PV disconnects.
Fast Blink
The battery voltage is less than the value for
low­voltage disconnection.
Fault
On Bad Battery / Over-current / Short-circuit.
On The 10/100/1000Base-T PoE port is link up.
Link/ACT
(For Port1/2) Blink
The BSP-300 is actively sending or receiving data
over that port.
On A PoE device is detected.
PoE in Use
Off No PoE device attached.
On
The port is running in 1000Mbps speed and
successfully established.
1000
(For Port3)
Blink
The BSP-300 is actively sending or receiving data
over that port.
On
The port is running in 100Mbps speed and
successfully established.
Link/ACT
( 10/100Base-Tx
For Port3) Blink
The BSP-300 is actively sending or receiving data
over that port.