Chapter 3. basic setup, 1 hardware installation, 1 safety precautions – PLANET BSP-300 User Manual
Page 18: 2 install solar power poe switch, Ardware, Nstallation
User’s Manual of BSP-300
17
Chapter 3. Basic Setup
3.1 Hardware Installation
3.1.1 Safety Precautions
Please read before using
1) All electrical work must be done in accordance with local, and/or international electrical
codes.
2) Before installing or using this device, read all instructions and cautionary marking located in
(or on) this guide, the controller, the batteries, PV (Photovoltaic) array and any other
device used.
3) To reduce the risk of short-circuits, use insulated tools when installing or working with the
inverter, the controller, the batteries, or any DC source (e.g., PV).
4) Remove all jewelry. This will greatly reduce the chance of accidental exposure to live circuits.
5) The controller contains more than one live circuit (batteries and PV array).
Power may be present at more than one source.
6) This product contains no user serviceable parts. Do not attempt to repair this unit unless fully
qualified.
3.1.2 Install Solar Power PoE Switch
Please follow the following instructions to setup your new Solar Power PoE Switch.