PLANET BSP-300 - Manual (Page 25)

Toolbar on the top:
Item Action
Open Open the existing controller parameter file in the computer.
Save Convert the controller parameters into a file and store it in the personal
computer.
Link PC Set the serial port of the computer to connect to the controller.
Note:
1. Use the “automatic detection” function or manually select the
required serial port and then click “OK” to confirm the setting
2. If the connection between the controller and the computer has
failed, the user is not able to read or change the parameter
settings in the controller.
Default Restore the parameter settings to the factory default.
Help Message for the software version.
Last Set Restore the current parameter settings in the utility to the previously
used parameter values.
New Set Load the current parameter settings in the utility into the controller.
Exit Exit the utility.
NOTE: Always click on New Set button whenever there is a new change to the new setting.
Description of the Related Setting Items:
Low Voltage Disconnection and Low Voltage Reconnection: When the battery voltage is lower
than the value for the low­voltage disconnection (LVD), the controller will stop supplying power to
24