PLANET BSP-300 - Manual (Page 35)

User’s Manual of BSP-300
34
the solar controller. If the current exceed the rated current of
the solar controller, please replace with PV panel or the port
which complies with the specifications.
3. Short circuit: Please check if the wires or connects at the
terminals are loosened, broken, or blown out. Please make
sure that no fallen wire contacts other terminals or wires to
cause short circuit.
NOTE:
If the battery voltage is lower than 18V, it can be used as a 12V battery system; if
the battery voltage is not lower than 18V, it can be used as a 24V battery system.