PLANET WNAP-3000PE - Manual (Page 11)

Chapter 3
Web Login
Your Browser must support JavaScript. The configuration program has been tested on
the following browsers:
z
Netscape V4.08 or later
z Internet Explorer V4 or later
Setup Procedure
Before proceeding, please install the WNAP-3000PE in your LAN, as described previ-
ously.
3. Use a PC which is already connected to your LAN, and start the Web browser.
4. In
the Address box, enter the IP address of the WNAP-3000PE you want to con-
figure.
Default IP address
http://192.168.0.228
5. You should then see a login prompt, which will ask for a User Name and Pass-
word.
Enter User Name, and Password.
User Name: admin
Password: password
6. You will then see the Status screen, which displays the current settings and status.
No data input is possible on this screen.
6