Checking tcp/ip settings - windows 2000 – PLANET WNAP-3000PE User Manual
Page 75
Advertising
Checking TCP/IP Settings - Windows 2000
1. Select Control Panel - Network and Dial-up Connection.
2. Right click the Local Area Connection icon and select Properties. You should see
a screen like the following:
Figure 7: Network Configuration (Win 2000)
3. Select
the
TCP/IP protocol for your network card.
4. Click on the Properties button. You should then see a screen like the following.
Figure 8: TCP/IP Properties (Win 2000)
70
Advertising